Design and Simulation of a 4×4 Butler Matrix-Fed 1×4 Microstrip Patch Antenna Array for Beam Steering
Simulation output guide for Design and Simulation of a 4×4 Butler Matrix-Fed 1×4 Microstrip Patch Antenna Array for Beam Steering with objective, modelling workflow, expected results, applications and related Electromagnetics and RF Engineering project links.
Project Overview
Design and Simulation of a 4×4 Butler Matrix-Fed 1×4 Microstrip Patch Antenna Array for Beam Steering is an SEO-ready ANSYS HFSS project page for antenna, RF and wireless communication research with video-based output verification.
Modelling Focus
The antenna project studies Butler-matrix-fed beam switching, directional radiation, port excitation, S-parameter behaviour, radiation pattern steering and gain response for wireless communication applications.
Expected Output Discussion
- S-parameter / return-loss response
- VSWR and impedance matching trend
- 2D / 3D radiation pattern
- gain/directivity comparison
- beam steering or beam switching view
Applications and Research Use
RF antenna design, 5G/6G wireless communication, beam steering systems, microwave research, antenna-array prototyping and OEM wireless validation.
SEO / Research Keywords
MATLAB Simulink project, PhD research support, OEM simulation model, engineering simulation output, HFSS antenna design, beam steering antenna, RF and microwave simulation, wireless communication antenna
Related Project Page
Open the dedicated project landing page with video output, thumbnail, metadata, related links and contact CTA.